02012nam a2200277Ia 4500003001000000005001700010040000900027090001200036245009200048490005400140520101200194650001701206650004901223650004701272650001001319650002001329700001301349700001401362700001301376700001401389856015601403942001401559008004101573999001701614952010301631MX-MdCICY20260521091407.0  cCICY  aB-1400910aAC impedance diagnosis of a 500W PEM fuel cell stack Part II: Individual cell impedance0 vJournal of Power Sources, 161(2), p.929-937, 20063 aAC impedance or electrochemical impedance spectroscopy (EIS)has been demonstrated to be a powerful technique for characterizing and evaluating fuel cells. In this work, as an extension of our previous study on the stack impedance of a 500W PEM fuel cell, we report the AC impedance studies on individual cells of the same fuel cell stack. The EIS of the stack with an active area of 280 cm2 was measured at currents from 10 to 210A in steps of 20A using the combination of a FuelCon test station, a TDI loadbank and a Solartron 1260 Frequency Response Analyzer. Measurement of the individual cell EIS was carried out with the help of a rotary switch unit made in our lab. Two methods (floating mode and grounded mode)were utilized for measuring the impedance spectroscopy of the individual cells. The results show that both methods are applicable to individual cells. The results also indicate a good agreement between the total Ohmic loss in the stack and the combined Ohmic losses of the individual cells.14aAC IMPEDANCE14aELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS)14aPROTON EXCHANGE MEMBRANE FUEL CELL (PEMFC)14aSTACK14aINDIVIDUAL CELL12aYuan, X.12aSun, J.C.12aWang, H.12aZhang, J.40uhttps://drive.google.com/file/d/1kLOzIP2n6M1fmD5wVUPi1_b8m99p9QAe/view?usp=drivesdkzPara ver el documento ingresa a Google con tu cuenta: @cicy.edu.mx  2LoccREF1250602s9999    xx |||||s2   |||| ||und|d  c24143d24143  00102Loc40708F1aCICYbCICYcREd2025-06-25l0oB-14009r2025-06-25 15:39:33w2025-06-25yREF1